Reviews need to be at least 250 characters in length and cannot contain any reference to quitting smoking to be approved for Rewards' Points. Please take notice of our full review guidelines before submitting.
The short cone for the Triton battery works better with cartomizers than the longer cone that comes with the Triton starter kit. The long cone leaves little room for the cartomizer past the end of the cone whereas the shorter cone is just right.
Great addition for my iridescent Triton battery. Perfect match and awesome feel. Highly recommend to all.
This is the only Triton piece that slightly misses the mark. The large cone, which is standard to the Triton kit is stylish to be sure, and fit and finish is great.
For me it is ok, but I can see that some folks will have issues with it leaving too little of the cartomizer tip and blocking the air flow. The Triton small cone while not giving quite as sleek an appearance, may be the better cone for some users.
I do like the cone, and am glad the kit comes with one. Having the Triton with a G6 cartomizer can be ideal at times as the 650 Triton battery and cartomizer makes for a nice compact "ecig" when on the run.
I use the cone that came with my starter kit with XL cartos. Its a perfect fit. Not sure how the standard cartos would fit, as I haven't tried those.
While the Triton and XL carto combo looks a lot better with the cone than without it, it serves other purposes - it protects the carto at it's base if it's in your pocket; my juices taste better with the cone on than off. It restricts just the right amount of airflow into the carto so there's not too much air.
And the cone and XL carto combo on the Triton looks cool and sleek.
Cone looks great on top of the triton battery and really does make for a sleeker, and low key appearance. My only issue is that most standard 808 cartomizers are a bit short when used with the cone. But I suppose that's where the halo XL carts come in handy. I also feel like there is just something much simpler about using a cart with the cone opposed to the tank. For me, I prefer the tank at home, and the carts with the cone while out.
I think it works and looks better when using a cart than with the large cone.
The cone makes your Triton battery look amazing with those cartomizers. If you are going out and do not want the tank with you these are perfect. I have used it a couple of times because I did not want the tank to draw attention to me. Defiantly worth having a couple of these laying around.
I really like the shorter cone because it leaves more of the cartomizer exposed and it is easy to draw from. The longer cone looks better but I like how this functions more. Color is an exact match and looks great.
I'm glad I added this with my Triton order. Must have if you plan to use cartos with your Triton. Its nice that it has the same rubber like finish as my battery has. I will also order the small cone as the large cone covers a little too much.
This thing really sets my Triton off when I'm using my cartos. I have had many compliments! Mix and match colors with your battery!
I love the cone on my small Triton battery when using a cart with a drip tip. Makes my small battery look a little more stealthy. With the cone, this might become my daily carry stealth vape.
What can one say, it's a cone!
The color perfectly matches its Triton equivalent, including the smooth rubbery finish.
While it's not large enough to accommodate the mini tank, it nicely covers up any cartomizer.
A little grinding/sanding will allow the G6's mini tank to fit.
I recently purchased the Triton starter kit from Halo, and found that it had the larger cone in the kit. I liked the cone because it made my Triton stylish when used with the cartomizers, but I did have difficulty pulling on the cartomizers because only a small bit stuck out from the tip.
The short cone, however, works perfectly! Just the right amount of the cartomizer sticks out, which makes taking a perfect drag much easier than with the larger cone. Also, the cones are designed to exactly match the corresponding color of battery! I am using the iridescent, and it looks amazing when pieced together! I am impressed that Halo thought ahead of time that some people may prefer a shorter cone!
I recently purchased the Triton starter kit from Halo, and found that it had the larger cone in the kit. I liked the cone because it made my Triton stylish when used with the cartomizers, but I did have difficulty pulling on the cartomizers because only a small bit stuck out from the tip. This is the reason for the four-star review. It was just too difficult to get a good drag without blocking some of the airflow.
I will admit, however, that this product works exceptionally well with the XL cartomizers. I believe that this may have been the true purpose for the large cone, and maybe this will help some of you who are wondering which cone would be right for you.
These cones make your Triton look sleek and stylish when on the go, plus they offer some protection to your cartomizer as well if you like to carry it in your pocket.
I could not be happier...i have converted scores of people...i started with the g-6..now i am up to the triton system....HEAVEN....thank you so much for your product..i could not be happier!!!
The cone really adds some style to your triton. Makes it look more like a fancy pen than say a needle. I just wish it was a little bit longer
Small cone that can be used in place of the large one that comes with the tank kit. I prefer to use this cone when using a cartridge since it gives me more space to put my mouth above the cone since air actually enters the system at the top of the cone. Same quality material as the rest of the Triton system. I think that this is the only way to go if using cartridges with the Triton system and for the price it simply cant be beat. Another good setup when using cartridge with the system is to add a drip tip which extends the mouth piece far above the cone. In the case that you use a drip tip, the large cone probably looks better.
The triton tank system is awesome and this accessory is great for when I want to carry it around and use cartridges instead. The different colors will match any triton system and looks perfect together. Get this if you want to vape cartridges on the go!
I received the large cone with my Triton Starter Kit, The cone is intended to use for e -cig cartomizers to keep the sleek clean appearance of the Triton. I wanted to use it for the Halo Mini tanks, but was a bit disappointed to find out that the top of the cone was a wee bit too small for the minis. So, I knew I could make it work with a small modification. I ordered an extra cone because I didn't want to Frankenstein the original. When I received the new cone, I fired up my bench grinder and after a few seconds had a cone that it the mini tanks. I took a fine file and cleaned up any rough edges to make it perfect. I am very happy with the results. I now have a cone to use with the mini tanks when I'm out and would rather have a smaller e-cig. Great product!
I like using carts with my Triton batts when "on the go"
This cone makes the unit look very good, and the colors (so far) are perfectly matched with the battery colors, with the same awesome no-slip grip coating.
Don't worry about sizes of the cone. Either size cone will work perfectly when using a drip tip. I like the looks of the larger cone myself.
Thanks Halo Team!
I received this as a gift from a fellow Halo enthusiast and I really like it. When used with a small cartomizer on the Triton battery, it makes the Triton look so much sleeker and more stylish. My only issue is that I don't prefer the color of the cone that was given to me. But, oh, well, it was a gift, right? So I really can't complain. I'll be ordering more (in my preferred colors) to go with both of my Triton batteries.
Although I care much more about performance and functionality than appearance, I do like to carry myself professionally. The cone added to the Triton tank system when using a cartomizer certainly doesn't change anything as far as how it operates or smokes(vapes). It does however look much better. The large cone that is included in the Triton tank starter kit does not work well with the standard size cartomizers. It does work perfectly well with the XL cartomizers. So, if you want to use cartomizers with your Triton tank system either order some XL cartomizers or order a standard cone and standard cartomizers.
I ordered the smaller cone so that I could get a better drag from the cartomizer. The larger cone looks very nice with with the cartomizer, but I found that I was getting my mouth to close to the cone and restricting the air flow. The smaller cone works much better, but much to my surprise, I discovered that the mini tank works with this cone! The cone does need to be attached to the battery, then the mini tank fits right inside. I don't know if this is just a fluke or it was designed that way, either way I don't care, I finally found a way to get the cone and the mini tank to work together!! I am very happy, but I seem to always be extremely happy with the Halo products. Keep up the excellent job Halo peeps!
I was given this as a gift and its pretty cool. I still prefer my normal tanks, but it gives the option of changing up the look of your vape.
Love the fact that it makes the use of standard cartos, but hate it that it does not fit the mini tanks. The long cones are better looking in my opinion, but neither do they fit the mini tanks, or give a comfortable vape with the standard cartos. I did notice that the mini tanks are just a wee bit wider in diameter to get inside this cones. Why Halo did not design these to fit both their cartos and mini tanks still puzzles me.
This product looks great on the Triton batteries, but unfortunately just leaves very little of the standard cartos sticking out to vape on. The XL cartos work just fine. After moving on to the mini tanks, I almost never use the cartos, and sadly they cannot be used with this cone. Someone else suggested to file down the inside of the cone to make the mini fit, and I guess I will try that out. Halo needs to address this flaw and make the cones usable with the minis, as they do make the Triton setup look cool and complete.
If you like using cartos than this is a must have addition to your Triton system. Keep in mind that this does not work with a mini tank. The cone is a perfect match to the battery and just makes it so sleek.
If you like to use the mini tank this cone is perfect to cover the thread on the Triton. Thread on the mini cone first, Then slip the tank down through the top of the cone and screw it on the battery. Makes for a nice clean look. Great color selection to match the batteries also. Perfect cone !
Overall, I really like these cones. Most times, I use the tanks. When I am going out to a nice eatery, etc; I sometimes want a smaller package. Combining a 650 battery with a G6 cart makes for a "very" compact setup. These cones complete the deal. I now have both a black (w/ the original start-up kit) and a demon red. The only downside to the large cone is the somewhat small purchase area for inhaling. The good looks outweighs the bit of bad for me. A big thumbs up here!
These stylish little additions to the Triton kit are very unique. They add that nice bit of flare, match the batteries very well and, the same finish is used. This has the same feel and is an excellent way to add that sleek look to any cartomizer set-up.
I've tried the G6 (cartomizers and mini-tanks) and I have used Triton with its large tank, the tank replacement coil system and the large battery..
After being through it all I've come to the conclusion that I like a mix the best.
I currently use a cartomizer, a long lasting 1300 mAh battery and the Large Triton Cone.
If you think you would like something more akin to a cigar then this setup may interest you.
I didn't originally have any cartomizers when I orders the Triton system, so I wasn't 100% sure what the cone was for.
I received a few G6s from another company and tried one on my triton battery with the cone over it. Looks so much better than just the little cartomizer on the big battery.
High style points.
It is for covering cartomizers, and I've also heard that if you do it a certain way it can also fit over the mini-tanks. It just makes it look more streamlined and stylish. It is good if you are out and forgot your juice, you can stop at your local shop and pick up a pack of cartomizers.
Although you do not need to have one of these to use your mini tank or carts on the Triton battery it sure makes the whole setup look awesome!! Plus they match perfectly!! And for me when using the mini tank I slide the tank through the sleeve first and tighten the tank first then the sleeve. The standard length is perfect for the shorter carts.
I use the Large Triton Cone to cover up my G6 mini-tanks paired with a 400Mah Triton battery. They're a great match and do fit with a bit of modification (filing). I just wish Halo made these to be a direct with with the G6 mini-tank instead of just the cartos. Otherwise, great product!
Fits snug, and gives it a nice clean look. The colors match exactly!! Overall a nice edition and makes my triton complete in my opinion. Not to mention it didn't come scuffed or anything. Great little peace and will buy one every time I buy a battery. Thank you Halo!!!!
If using a cartomizer, these cones are great for masking the odd shape of the battery and carto put together. They make for a "cigar-like" shape that is certainly easier on the eyes than just having the tiny carto sticking off the larger Triton battery.
The only downside is that they do not fit mini-tanks, a mild inconvenience since they are for cosmetic purposes only.
This little cone is a necessity for the Triton system. If you buy a Triton starter kit, it comes with the large cone. The large cone is okay, I guess it has its uses. But if you're using a cartomizer with the Triton, the large cone doesn't really leave enough carto sticking out for a good vape. The standard cone is perfect for cartos. When I'm out and about and feel like carrying my Triton, sometimes I don't want the tank attached, I'd rather be subtle with my vaping so I use cartomizers. This standard cone is what you need. Well, you don't NEED it, you can use the Triton and cartomizer with no cone at all, but at $2.50, this cone is a steal. When using this cone, it leaves about half of the cartomizer sticking out, plenty enough to get a good draw. If you're getting a Triton, spend an extra $2.50 and get this cone!
I got his with my starter kit and it looks really pretty but honestly i'm not sure what i'm supposed to do with it. I guess you have to buy the little G6 cartridges to be able to use it, yet they don't include any with the kit! Most likely mine is just going to sit in my box unused. Thanks anyway Halo!
These work great with cartomizers...it really "finishes" the look of a Triton battery coupled with cartos. I was eager to try it with a G6 mini tank; so I ordered two to see how it would work. Funny thing is, I could get one cone over a mini tank and screwed onto the battery just fine...however the other cone would not fit over the diameter of a different mini tank...hmmmm. Seems that they were slightly the right size or just a little smaller...and if you assemble them just right you can get a cone (standard) over a mini tank and screwed into the battery. Now I have one cone that will fit over all the mini tanks I have except one. I have also noticed some mini tank / standard cone combos will seal too tightly to the battery causing difficult to nearly impossible draws. If I could make a suggestion to team Halo it would be this, two small air intake holes drilled into the standard cones on the wide opening closest to the battery (should provide better airflow) & if the cones themselves were bored just larger than the diameter of the mini tanks (would easily fit over mini's). Other than that, the cones are a nice aesthetic look to your Triton set ups.
I got one of these with my starter kit and works really well. Makes and finishes the look of the whole E-Cig. I want to order more for all the different color batteries i have too. The size is personal preference, i like the big one. Halo really knows how to make the best looking/working device out there for sure.
At first I though $2.49 was kind of steep for a small, unnecessary piece of hardware, but I'm really glad I bought it. While using cartomizers, the standard triton cone makes your triton device look so sleek since it covers up some of the length of the cartomizer. It's definitely worth the price.
Really adds a nice flair to the look of your Triton. Nice assortment of colors to choose from and a great price.
Cone makes the system look more classy, love it.
When I received the cone in the Triton starter kit, I wasn't sure I would find it useful, but I was mistaken. The cone is a must have when I take my compact 400 mAh Triton out with a cartomizer. It gives the kit a more elegant appearance and reinforces/stabilizes the cartomizer to battery connection while the kit is in a shirt or pants pocket. I would add another star if the cone worked with the G6 mini-tanks as well (mine doesn't fit).
Just to clarify a Large cone leaves a small nub or the cartomizer sticking out while a standard cone leaves a small portion of the cartomizer sticking out. Use a large cone for a cigar like feel and a standard cone for the feel of the end of the cartomizer.
I've had my Triton kit for some time now, but fired up some cartomizers using this cone for the first time today. Love my Triton tanks, but this nifty little add-on helps support and stylishly cover the cartomizers on your system if you have the need to use them.
Just thread on the cartomizer first, and the cone piece slips over the top like a sleeve. It's threaded separately, and provide additional protection around the relatively thin width of the carts. Great if you're a bit heavy handed or accident prone to prevent damaging the thread or connection.
Looks stylish, and now I can drag some carts with me for backup when I'm out and about or otherwise on the move.
I found that I prefer the look of this size cone over the smaller one. It doesn’t leave much room on the cartridge for your mouth, though. You have to be careful to not cover the opening or you’ll block the airflow completely. These cones also don’t work with the mini tanks without modification. The tanks fit a little too tightly and there is no airflow at all when you use the cones. You can file the opening a little in order to fix this.
I just recently tried one of these on my Triton battery, with a friends cartomizer, and it definitely makes the device look 100x better! I plan to order some Halo Turkish pre-filled cartomizers soon, that way I can use them when I need my device to be smaller and more concealable.
Adds a nice touch, durable as well.
Since I got the triton cone, people are drawn to what it is that I am vaping. It really brings a more classy look to my vamping experience. I totally recommend that you try it.
This sleeve is simple to install and adds an aesthetic look to make everything look like one unit.
I ordered the demon red triton starter kit and the Tribeca flavor ejuice. I'm sold, from the first time I tried until today, it is nothing but Halo. This is a great product and the American made is just what I was looking. Don't be fooled by those other brands, Halo rocks!
I would like to have this cone attached to my Triton while I smoke it. It took me awhile to even realize what this is for. It seems as though it is completely decorative and can only be used at times when you aren't smoking.
At first, I was wondering what exactly is the point for this cone. After using it for my girlfriends cartomizers, they make it look great and it is safer than just using the cartomizers on it. The cartomizers use the smaller threads and would probably break if it dropped but this adds extra strength and keeps the aesthetics looking just as good. If you use the carts then this is a must for the Triton tanks.
The color of this is truly beautiful! Looks very nice with the matching battery. Wish it were a little longer though so to cover more of the cartomizers a bit more.
I know they're not made to work with the mini tanks on the Triton batteries, but I was able to fit them both on my battery. The fit around the tank is a little snug, you have to put the cone on first, and then put the mini tank on. It looks pretty slick and certainly rounds out the profile of the setup. The metal used is pretty thin, and more than likely aluminum, so be careful not to bend or squish it!
I have the small and large cone. I love the large cone on my Triton especially when I am using cartomizers instead of the tanks. I know a lot of people say it only leaves a small amount of room for your lips but here's my advice to you, add a nice matching drip tip and it will make your vaping experience much better. Also, the Triton with a large cone looks much more refined, it's just straight awesome! The large cone and drip tips are very inexpensive, very well made, and durable accessories that make a world of difference! So dress your Triton up and make it more enjoyable at the same time!! You won't be disappointed!
The standard Triton cone does the job. It looks nice and very durable.
I am going to be honest, it took me awhile to figure out what this was actaully for when it came in my Triton kit. However, it turned out it works really well! It is really just an aesthetic piece used to make the Triton batteries look better when using a cartomizer. Otherwise, it looks like a big battery with a little cartomizer on top. You want the standard cone for a regular G6 cartomizer and the larger cone for the longer cartomizers. The only downside I found was my lips wouldkind of bump up against the cone and just didnt like the feeling. It might not be for everyone but it looks great and makes things look more cohesive when using a G6 cartomizer.
This really does add a nice sleekness to the otherwise larger tank system when coupled with a cartomizer. It does seem to impede air flow somewhat, but it is still entirely functional. It really does make the system pretty tiny when used with the 400 mAh battery. It feels like a small cigar when held between your fingers.
I was not sure how to use this at first--but then one day I attached a cartomizer to my Triton battery. After installing the cone, I had a nice streamlined looking device again—also helps you slip it in and out of your pocket with fewer snags. This is just a little detail, but it is nice to have—and it is also included in the Triton Starter kits currently.
|Cone Width||14.2 mm|
|Cone Warranty||90 Days from Date of Purchase|