Reviews need to be at least 250 characters in length and cannot contain any reference to quitting smoking to be approved for Rewards' Points. Please take notice of our full review guidelines before submitting.
I was not sure how to use this at first--but then one day I attached a cartomizer to my Triton battery. After installing the cone, I had a nice streamlined looking device again—also helps you slip it in and out of your pocket with fewer snags. This is just a little detail, but it is nice to have—and it is also included in the Triton Starter kits currently.
This really does add a nice sleekness to the otherwise larger tank system when coupled with a cartomizer. It does seem to impede air flow somewhat, but it is still entirely functional. It really does make the system pretty tiny when used with the 400 mAh battery. It feels like a small cigar when held between your fingers.
I am going to be honest, it took me awhile to figure out what this was actaully for when it came in my Triton kit. However, it turned out it works really well! It is really just an aesthetic piece used to make the Triton batteries look better when using a cartomizer. Otherwise, it looks like a big battery with a little cartomizer on top. You want the standard cone for a regular G6 cartomizer and the larger cone for the longer cartomizers. The only downside I found was my lips wouldkind of bump up against the cone and just didnt like the feeling. It might not be for everyone but it looks great and makes things look more cohesive when using a G6 cartomizer.
The standard Triton cone does the job. It looks nice and very durable.
I know they're not made to work with the mini tanks on the Triton batteries, but I was able to fit them both on my battery. The fit around the tank is a little snug, you have to put the cone on first, and then put the mini tank on. It looks pretty slick and certainly rounds out the profile of the setup. The metal used is pretty thin, and more than likely aluminum, so be careful not to bend or squish it!
At first, I was wondering what exactly is the point for this cone. After using it for my girlfriends cartomizers, they make it look great and it is safer than just using the cartomizers on it. The cartomizers use the smaller threads and would probably break if it dropped but this adds extra strength and keeps the aesthetics looking just as good. If you use the carts then this is a must for the Triton tanks.
I would like to have this cone attached to my Triton while I smoke it. It took me awhile to even realize what this is for. It seems as though it is completely decorative and can only be used at times when you aren't smoking.
I just recently tried one of these on my Triton battery, with a friends cartomizer, and it definitely makes the device look 100x better! I plan to order some Halo Turkish pre-filled cartomizers soon, that way I can use them when I need my device to be smaller and more concealable.
I've had my Triton kit for some time now, but fired up some cartomizers using this cone for the first time today. Love my Triton tanks, but this nifty little add-on helps support and stylishly cover the cartomizers on your system if you have the need to use them.
Just thread on the cartomizer first, and the cone piece slips over the top like a sleeve. It's threaded separately, and provide additional protection around the relatively thin width of the carts. Great if you're a bit heavy handed or accident prone to prevent damaging the thread or connection.
Looks stylish, and now I can drag some carts with me for backup when I'm out and about or otherwise on the move.
Really adds a nice flair to the look of your Triton. Nice assortment of colors to choose from and a great price.
At first I though $2.49 was kind of steep for a small, unnecessary piece of hardware, but I'm really glad I bought it. While using cartomizers, the standard triton cone makes your triton device look so sleek since it covers up some of the length of the cartomizer. It's definitely worth the price.
I got one of these with my starter kit and works really well. Makes and finishes the look of the whole E-Cig. I want to order more for all the different color batteries i have too. The size is personal preference, i like the big one. Halo really knows how to make the best looking/working device out there for sure.
These work great with cartomizers...it really "finishes" the look of a Triton battery coupled with cartos. I was eager to try it with a G6 mini tank; so I ordered two to see how it would work. Funny thing is, I could get one cone over a mini tank and screwed onto the battery just fine...however the other cone would not fit over the diameter of a different mini tank...hmmmm. Seems that they were slightly the right size or just a little smaller...and if you assemble them just right you can get a cone (standard) over a mini tank and screwed into the battery. Now I have one cone that will fit over all the mini tanks I have except one. I have also noticed some mini tank / standard cone combos will seal too tightly to the battery causing difficult to nearly impossible draws. If I could make a suggestion to team Halo it would be this, two small air intake holes drilled into the standard cones on the wide opening closest to the battery (should provide better airflow) & if the cones themselves were bored just larger than the diameter of the mini tanks (would easily fit over mini's). Other than that, the cones are a nice aesthetic look to your Triton set ups.
This little cone is a necessity for the Triton system. If you buy a Triton starter kit, it comes with the large cone. The large cone is okay, I guess it has its uses. But if you're using a cartomizer with the Triton, the large cone doesn't really leave enough carto sticking out for a good vape. The standard cone is perfect for cartos. When I'm out and about and feel like carrying my Triton, sometimes I don't want the tank attached, I'd rather be subtle with my vaping so I use cartomizers. This standard cone is what you need. Well, you don't NEED it, you can use the Triton and cartomizer with no cone at all, but at $2.50, this cone is a steal. When using this cone, it leaves about half of the cartomizer sticking out, plenty enough to get a good draw. If you're getting a Triton, spend an extra $2.50 and get this cone!
If using a cartomizer, these cones are great for masking the odd shape of the battery and carto put together. They make for a "cigar-like" shape that is certainly easier on the eyes than just having the tiny carto sticking off the larger Triton battery.
The only downside is that they do not fit mini-tanks, a mild inconvenience since they are for cosmetic purposes only.
Fits snug, and gives it a nice clean look. The colors match exactly!! Overall a nice edition and makes my triton complete in my opinion. Not to mention it didn't come scuffed or anything. Great little peace and will buy one every time I buy a battery. Thank you Halo!!!!
Although you do not need to have one of these to use your mini tank or carts on the Triton battery it sure makes the whole setup look awesome!! Plus they match perfectly!! And for me when using the mini tank I slide the tank through the sleeve first and tighten the tank first then the sleeve. The standard length is perfect for the shorter carts.
It is for covering cartomizers, and I've also heard that if you do it a certain way it can also fit over the mini-tanks. It just makes it look more streamlined and stylish. It is good if you are out and forgot your juice, you can stop at your local shop and pick up a pack of cartomizers.
I didn't originally have any cartomizers when I orders the Triton system, so I wasn't 100% sure what the cone was for.
I received a few G6s from another company and tried one on my triton battery with the cone over it. Looks so much better than just the little cartomizer on the big battery.
High style points.
These stylish little additions to the Triton kit are very unique. They add that nice bit of flare, match the batteries very well and, the same finish is used. This has the same feel and is an excellent way to add that sleek look to any cartomizer set-up.
If you like to use the mini tank this cone is perfect to cover the thread on the Triton. Thread on the mini cone first, Then slip the tank down through the top of the cone and screw it on the battery. Makes for a nice clean look. Great color selection to match the batteries also. Perfect cone !
Love the fact that it makes the use of standard cartos, but hate it that it does not fit the mini tanks. The long cones are better looking in my opinion, but neither do they fit the mini tanks, or give a comfortable vape with the standard cartos. I did notice that the mini tanks are just a wee bit wider in diameter to get inside this cones. Why Halo did not design these to fit both their cartos and mini tanks still puzzles me.
I was given this as a gift and its pretty cool. I still prefer my normal tanks, but it gives the option of changing up the look of your vape.
I ordered the smaller cone so that I could get a better drag from the cartomizer. The larger cone looks very nice with with the cartomizer, but I found that I was getting my mouth to close to the cone and restricting the air flow. The smaller cone works much better, but much to my surprise, I discovered that the mini tank works with this cone! The cone does need to be attached to the battery, then the mini tank fits right inside. I don't know if this is just a fluke or it was designed that way, either way I don't care, I finally found a way to get the cone and the mini tank to work together!! I am very happy, but I seem to always be extremely happy with the Halo products. Keep up the excellent job Halo peeps!
Although I care much more about performance and functionality than appearance, I do like to carry myself professionally. The cone added to the Triton tank system when using a cartomizer certainly doesn't change anything as far as how it operates or smokes(vapes). It does however look much better. The large cone that is included in the Triton tank starter kit does not work well with the standard size cartomizers. It does work perfectly well with the XL cartomizers. So, if you want to use cartomizers with your Triton tank system either order some XL cartomizers or order a standard cone and standard cartomizers.
I received this as a gift from a fellow Halo enthusiast and I really like it. When used with a small cartomizer on the Triton battery, it makes the Triton look so much sleeker and more stylish. My only issue is that I don't prefer the color of the cone that was given to me. But, oh, well, it was a gift, right? So I really can't complain. I'll be ordering more (in my preferred colors) to go with both of my Triton batteries.
The triton tank system is awesome and this accessory is great for when I want to carry it around and use cartridges instead. The different colors will match any triton system and looks perfect together. Get this if you want to vape cartridges on the go!
Small cone that can be used in place of the large one that comes with the tank kit. I prefer to use this cone when using a cartridge since it gives me more space to put my mouth above the cone since air actually enters the system at the top of the cone. Same quality material as the rest of the Triton system. I think that this is the only way to go if using cartridges with the Triton system and for the price it simply cant be beat. Another good setup when using cartridge with the system is to add a drip tip which extends the mouth piece far above the cone. In the case that you use a drip tip, the large cone probably looks better.
I recently purchased the Triton starter kit from Halo, and found that it had the larger cone in the kit. I liked the cone because it made my Triton stylish when used with the cartomizers, but I did have difficulty pulling on the cartomizers because only a small bit stuck out from the tip.
The short cone, however, works perfectly! Just the right amount of the cartomizer sticks out, which makes taking a perfect drag much easier than with the larger cone. Also, the cones are designed to exactly match the corresponding color of battery! I am using the iridescent, and it looks amazing when pieced together! I am impressed that Halo thought ahead of time that some people may prefer a shorter cone!
What can one say, it's a cone!
The color perfectly matches its Triton equivalent, including the smooth rubbery finish.
While it's not large enough to accommodate the mini tank, it nicely covers up any cartomizer.
A little grinding/sanding will allow the G6's mini tank to fit.
This thing really sets my Triton off when I'm using my cartos. I have had many compliments! Mix and match colors with your battery!
I really like the shorter cone because it leaves more of the cartomizer exposed and it is easy to draw from. The longer cone looks better but I like how this functions more. Color is an exact match and looks great.
I think it works and looks better when using a cart than with the large cone.
The short cone for the Triton battery works better with cartomizers than the longer cone that comes with the Triton starter kit. The long cone leaves little room for the cartomizer past the end of the cone whereas the shorter cone is just right.
|Category Name||Medium Cone|
|Cone Size||25mm - Medium|
|Cone Width||14.2 mm|
|Cone Warranty||90 Days from Date of Purchase|