0item(s)

You have no items in your shopping cart.

NEW TO VAPING

Product was successfully added to your shopping cart.

Tracer FAQ

 
  • How do I turn this thing on?
    To turn on your Tracer battery, click the firing button on the side of the battery five times in rapid succession. The button’s backlight will blink five times to indicate the Tracer has been successfully turned “on.”
    Rate This Answer:

  • Should I turn off my Tracer before storing it?
    Yes. While the battery will not drain just by being on—and though there are safeguards in place—it is best to turn off the battery any time you have finished using the Tracer and are about to store it in a pocket, purse or drawer.
    Rate This Answer:

  • Where should I store my Tracer?
    This device should be kept out of reach of children and pets and stored safely in a dry environment. Do not store in high-temperature areas as this will cause irreversible damage to batteries and other components.
    Rate This Answer:

  • The backlight on my Tracers Firing Button is blinking, what does this mean?
    The Tracer’s firing button backlight will display the amount of battery life remaining.
    Rate This Answer:

  • How do I charge my Tracer?
    To charge your Tracer, attach the small connector of the USB cable into the charging port of the Tracer battery. The larger end of the cable should then be inserted into a computer or other USB compatible power source, or can be used in conjunction with the provided Wall Charger.
    Rate This Answer:

  • How do I know my Tracer is charging?
    Once connected to a power source, the Charge Indicator at the bottom of the unit will glow red. When the unit is fully charged the red light will blink five times and then go out.
    Rate This Answer:

  • What is the average charge time for my Tracer?
    The Tracer takes about three and a half hours to charge from its fully drained state.
    Rate This Answer:

  • How do I fill my tank?
    Refilling the Tracer tank is easy. First, unscrew the entire tank from the battery. Once removed, hold the tank with mouthpiece side down and unscrew the Base from the Chamber by turning counter-clockwise. Next, hold the Chamber on a slight angle and pour E-liquid into the tank along the glass side.
    Rate This Answer:

  • When should I refill my tank?
    The Tracer tanks perform best when filled with at least 2 ml of E-liquid continuously. This ensures the heating element remains moist during use and will extend the overall life of the coil head. It is recommended that tanks be refilled once the E-liquid level drops below the top of the coil head.
    Rate This Answer:

  • What type of E-liquid should I use in my Tracer?
    To get optimal performance it is recommended that you use Halo V-Type E-liquids with a higher VG content for better vapor production and maximized taste.
    Rate This Answer:

  • What is adjustable airflow?
    The Tracer tank is equipped with an adjustable airflow system allowing the user to control the amount of air taken in. A wider air hole creates a “looser” draw that results in cooler vapor. A narrow air hole creates a “tighter” draw with warmer vapor. To adjust airflow, twist the ring on the base hardware left or right to change the size of the air hole.
    Rate This Answer:

  • When should I replace my coil head?
    If you experience a sustained burnt taste when vaping, or if your tank is no longer producing adequate vapor, it may be time for a replacement. It is also recommended to change your coils when switching between E-liquids to ensure there is no carry over of old flavors.
    Rate This Answer:

  • How do I replace my coil head?
    To replace a coil head, first unscrew the entire tank from the battery. Once the tank is removed, hold the tank with mouthpiece side down and unscrew the Base from the Chamber. Once the Base is remove the coil head will be exposed. Unscrew and remove the old coil head from the Base by turning counter-clockwise. Dispose of the old coil head, ensuring it is kept out of reach of children and pets. Attach a new coil head to the Base by lining up the threads and turning clockwise until snug. The Base should then be re-attached to the Chamber.
    Rate This Answer:

  • When should I clean my tank?
    Your tank should be cleaned on a regular basis to remove any residue that may collect inside the Chamber. It is also highly recommended that you clean the tank when switching between E-liquids to ensure there is no carry over of old flavors.
    Rate This Answer:

  • How do I clean my tank?
    To thoroughly clean the tank, each individual component should be disassembled. First, unscrew the entire tank from the battery. Once removed, hold the tank with mouthpiece side down and unscrew the Base from the Chamber by turning counter-clockwise. Dispose of any remaining E-liquid. Unscrew and remove the coil head from the Base by turning counter-clockwise. Dispose of the coil head or place it in a safe place for later use. Remove the mouthpiece and rinse all components (except for the coil head) under warm water until all E-liquid has been removed. A cotton swab may be used to remove any remaining liquid.
    Rate This Answer: